QuickPWN » iPhone 3GS

Jailbreak and unlock iPhone 3.1.2 using blacksn0w

Hans — Tue, 03 Nov 2009 22:12:05 +0000

Today Geohot released his blacksn0w software unlock for the iPhone 3G and the iPhone 3GS. If you would like to unlock your iPhone on firmware 3.1.2 and use them with other carriers, this tutorial will show you how.

Read the rest of this entry »

blacksn0w

Hans — Sat, 31 Oct 2009 20:25:39 +0000

blacksn0w is a software unlock developed by Geohot for both iPhone 3G and iPhone 3GS users. It works with the latest baseband 05.11.07 and is scheduled to be released on November 4.

Read the rest of this entry »

Jailbreak iPhone 3.12, iPhone 3G, iPhone 3GS, or any iPod touch with blackra1n RC2

Hans — Sun, 25 Oct 2009 21:22:04 +0000

Two weeks ago, Geohot released his blackra1n iPhone 3.1.2 jailbreak. The blackra1n jailbreak software worked with all iPhones and iPod touches running on iPhone 3.1.2 firmware except for the newer 8GB iPod touch (MC models) that Apple released after the September 9 event. The blackra1n jailbreak also did not work on the newer iPhone 3GS which Apple patched the 24kpwn exploit in. blackra1n RC2 works with all iPhone and iPod touches, but the newer iPod touch and iPhone are only tethered jailbreaks. Tethered means that you will need to run blackra1n each time you reboot your iPhone or iPod touch. If you were an iPhone 3G user, you most likely had to try many different methods to get blackra1n to work. Geohot has fixed the iPhone 3G problem so blackra1n should now jailbreak without any problem.

If you already did jailbreak your iPhone or iPod touch, you don’t need to use blackra1n again.

Jailbreak iPhone 3.1.2 with blackra1n RC2

Here is how you can jailbreak iPhone 3.1.2 firmware using blackra1n RC2.

1. Download blackra1n RC2 (Available for both Windows & Mac)

2. Follow the steps at my jailbreak iPhone 3.1.2 post.

blackra1n on Windows 7

I tried blackra1n on Windows 7, but it crashed when I first tried opening it. To get blackra1n to work on Windows 7, do the following:

1. Right-click the blackra1n icon and click properties.

2. Click the Compatibility tab.

3. Under compatibility mode click the box to enable it and select Windows XP (Service Pack 2). Click OK, and then run blackra1n.

I’ve only tried this on a Windows 7 32-bit setup, but it should work on a 64-bit setup as well.

Jailbreak iPhone 3.1.2

Hans — Sat, 17 Oct 2009 02:22:06 +0000

The iPhone 3.1.2 update that Apple released last week required users of jailbroken iPhones or iPod Touches to wait for a new jailbreak software to be released before updating. There was no jailbreak available until Geohot released his new blackra1n 1 click jailbreak software. The blackra1n software is available for both Windows and Mac users, but it only supports iPhone, iPhone 3G, iPhone 3GS, and iPod Touch. blackra1n does not support the iPod Touch 3rd generation 8 GB models that have a MC in the model number. Many iPhone 3G users reported having a problem with blackra1n on iPhone 3G, if you were one of them please leave a comment telling us what problems you encountered and how you solved them. I will be making a blackra1n troubleshooting guide to help users that have any problem with it. You can jailbreak iPhone 3.1.2 with blackra1n, but you cannot unlock iPhone 3.1.2. To unlock iPhone 3.1.2, you must use PwnageTool 3.1.4 which the Dev-Team recently released.

If you want to just jailbreak iPhone 3.1.2 I recommend you use blackra1n, but if you want to unlock then you have no choice but to use PwnageTool which only works with Mac. If you haven’t already downloaded iPhone 3.1.2 or updated, the download links for it are below.

iPhone 3.1.2 download (iPhone1,1_3.1.2_7D11_Restore.ipsw, 241 MB)
iPhone 3G 3.1.2 download (iPhone1,2_3.1.2_7D11_Restore.ipsw, 242 MB)
iPhone 3GS 3.1 download (iPhone2,1_3.1.2_7D11_Restore.ipsw, 306 MB)

Note: Do no’t use Safari to download iPhone 3.1.2 IPSW files, instead use another browser. Safari downloads this as a .ZIP and iTunes is not able to recognize the firmware that way.

Jailbreak iPhone 3.1.2 with blackra1n

1. Download blackra1n

2. Click the make it ra1n button.

3. Your iPhone or iPod Touch will reboot once blackra1n is done doing it’s thing and you should see the blackra1n icon on there. If you don’t see the blackra1n icon, go to the last page on your iDevice and you should see it.

4. Install your preferred aplication from the blackra1n app. You have the option of choosing Cydia, Icy, or Rock. I don’t recommend you to install them all at once, because that may cause problems. Install them one at a time.

Jailbreak iPhone 3.1.2 with PwnageTool

1. Download PwnageTool 3.1.4 (only works with Mac!)

2. You will be creating a custom IPSW and then restoring it through iTunes. If you don’t know how to do that, read my jailbreak iPhone 3.1 with PwnageTool post which gives step by step instructions.

Jailbreak and unlock iPhone 3.1.2

Hans — Thu, 08 Oct 2009 19:26:27 +0000

Update #2: Want to unlock iPhone 3.1.2? Go to my download and install blacksn0w post to unlock.

Update #1: Go to my jailbreak iPhone 3.1.2 with blackra1n post to jailbreak your iPhone or iPod Touch!

Today the iPhone 3.1.2 update was released to iPhone, iPhone 3G, iPhone 3GS, and iPod Touch usres. This update includes mainly bug fixes. If you would like to jailbreak or unlock your device, you must read this. If you have an unlocked iPhone 3G or iPhone 3GS do not update to this new firmware, updating to the iPhone 3.1.2 firmware will permanently update your baseband. The newer baseband does not support software unlocking.

The jailbreak has not been released yet, but you if you’ve got too much time on your hands you may be able to jailbreak if you try the following. If this works please share your results in the comments.

How to Jailbreak iPhone 3.1.2

1. Update to iPhone 3.1.2. After updating, find your iPhone 3.1.2 IPSW file or download it using any of the links below. Remember, don’t use Safari to download. Safari can’t download .IPSW files properly, use a different browser!

iPhone 3.1.2 download (iPhone1,1_3.1.2_7D11_Restore.ipsw, 241 MB)
iPhone 3G 3.1.2 download (iPhone1,2_3.1.2_7D11_Restore.ipsw, 242 MB)
iPhone 3GS 3.1 download (iPhone2,1_3.1.2_7D11_Restore.ipsw, 306 MB)

2. Download redsn0w.

3. Follow the jailbreaking guide at the Jailbreak iPhone 3.1 post.

Unlock iPhone 3.1.2

It’s possible to unlock iPhone 3.1.2 but only if your baseband has not been updated to 05.11.07 or the newer baseband, you must create a custom firmware that uses the 04.26.08 baseband. The iPhone 3.1.2 update updates the baseband to a newer one that permanently blocks the software unlock. A guide on how to unlock iPhone 3.1.2 will be up once a jailbreak tool is released.

For now, follow @QuickPWN and subscribe to QuickPwn YouTube channel for updates.

Today Geohot released blacksn0w. I’ve created a step-by-step tutorial on how to
install blacksn0w on iPhone OS 3:
http://www.iphoneos3.com/2009/11/03/download-and-install-blacksn0w-for-iphone-3g-or-iphone-3gs-3-1-2/

Any linkbacks on your blog are appreciated. We are also creating
guides for users on how to download Cydia’s On File so they can be
safe from future updates.

Jailbreak iPhone 3.1

Hans — Wed, 09 Sep 2009 20:38:48 +0000

Update: This tutorial does not install Cydia, in other words you must wait for iPhone Dev Team to release the new redsn0w software. When I saw the successfully jailbroken message on the screen I thought Cydia was installed and in all the excitement I decided to post this up for everyone else. Please wait until the new redsn0w is out. Bookmark this site and I’ll make a tutorial once it’s officially released.

With the iPhone 3.1 update which was recently released, jailbreakers will need to jailbreak their devices again. This update fixes a lot of bugs that were present in the iPhone OS 3.0 firmware, has anti-phising built-in and other cool features. In this post I will explain how to jailbreak iPhone 3.1 using redsn0w.

Note: This tutorial will be using redsn0w version 0.8. There is no redsn0w 3.1 out yet, but this worked for me on 1st Generation iPod Touch 3.1. It may not work for iPhone. If this does not work then don’t complain! I recommend you wait for the Dev Team to release the next version of redsn0w (which may be some time this week). I’ll make another tutorial once they do.

If you unlocked your iPhone and you want to keep your unlock, then don’t update to iPhone 3.1 otherwise you won’t ever be able to software unlock again (iPhone 3.1 updates the baseband permanently).

You must update to iPhone 3.1 first (if you have an unlocked iPhone you must not update yet as this will permanently lock your iPhone). After updating, either locate your iPhone 3.1 IPSW file or download it using any of the links below. Do not use Safari, instead use Firefox or Internet Explorer to download otherwise this will download as a Zip file!

iPhone 3.1 download (iPhone1,1_3.1_7C144_Restore.ipsw, 241 MB)
iPhone 3G 3.1 download (iPhone1,2_3.1_7C144_Restore.ipsw, 242 MB)
iPhone 3GS 3.1 download (iPhone2,1_3.1_7C144_Restore.ipsw, 306 MB)

3. Follow the jailbreaking guide below.

Note:

redsn0w only recognizes iPhone 3.0 firmware (not 3.1 yet!), although you are running firmware 3.1 you must still download iPhone OS 3.0 firmware for your device.

First you must download redsn0w for Windows, Mac, or Linux from here.

redsn0w 0.8 might work for Phone 3.0.1, iPhone 3G 3.0.1, iPhone 3GS 3.0.1, iPod Touch 3.0, and iPod Touch 2G 3.0.

1. Download the iPhone OS 3.0 IPSW file for your device and save it to your desktop. Here are the file names for each device, make sure you have the right one:

iPhone 2G – filename: iPhone1,1_3.0_7A341_Restore.ipsw [download link]
iPhone 3G – filename: iPhone1,2_3.0_7A341_Restore.ipsw [download link]
iPhone 3GS – filename: iPhone2,1_3.0_7A341_Restore.ipsw [download link]

2. Open the redsn0w 0.8 application to jailbreak iPhone 3.0.1.
3. Click the Browse button.

4. Locate your device’s IPSW file that you downloaded in step 1 and click Open.

5. The redsn0w window will have the “IPSW successfully identified” message. Click the Next button to continue.

Page 2– Jailbreak iPhone 3.1 tutorial

Jailbeak and Unlock iPhone 3.1

Hans — Wed, 09 Sep 2009 19:03:36 +0000

Today the iPhone 3.1 update was released to the public. This update fixes a lot of bugs that were present in the iPhone OS 3.0 firmware. If you want to jailbreak or unlock your device, follow the steps below. If you have an unlocked iPhone 3G or iPhone 3GS do not update just yet, updating will permanently lock your device and the ultrasn0w unlocking software won’t work.

The jailbreak has not been released yet, but you can do the following to prepare for it.

How to Jailbreak iPhone 3.1

1. You must update to iPhone 3.1 first. After updating, either locate your iPhone 3.1 IPSW file or download it using any of the links below. Remember, don’t use Safari to download. Safari can’t download .IPSW files properly, use a different browser!

iPhone 3.1 download (iPhone1,1_3.1_7C144_Restore.ipsw, 241 MB)
iPhone 3G 3.1 download (iPhone1,2_3.1_7C144_Restore.ipsw, 242 MB)
iPhone 3GS 3.1 download (iPhone2,1_3.1_7C144_Restore.ipsw, 306 MB)

2. Download redsn0w (not up yet, stay tuned!).

3. Follow the jailbreaking guide at the Jailbreak iPhone 3.1 post (not up yet).

Unlock iPhone 3.1

To software unlock iPhone 3.1, you must create a custom firmware that uses the current baseband. The iPhone 3.1 update updates the baseband to a newer one that permanently blocks the software unlock. A guide on how to unlock iPhone 3.1 this will be up later.

Jailbreak iPhone 3.0.1

Hans — Sat, 01 Aug 2009 18:33:00 +0000

The iPhone 3.0.1 update was recently released. If you want to jailbreak any iPhone running on iPhone OS 3.0.1, you must use redsn0w 0.8. This post will show a step-by-step tutorial on how to jailbreak iPhone 3.0.1 with redsn0w.

Note:

redsn0w only recognizes iPhone 3.0 firmware (not 3.0.1 yet!), although you are running firmware 3.0.1 you must still download iPhone OS 3.0 firmware for your device.
The recent iPhone 3.0.1 update does not fix the iPhone 3GS hole, so it’s safe for iPhone 3GS users to update. If you downloaded a purplera1nday file or your iBec or iBSS for iPhone 3GS you don’t need to redownload it because it’s identical in this update.

First you must download redsn0w for Windows, Mac, or Linux from here.

redsn0w 0.8 works for Phone 3.0.1, iPhone 3G 3.0.1, iPhone 3GS 3.0.1, iPod Touch 3.0, and iPod Touch 2G 3.0.

1. Download the iPhone OS 3.0 IPSW file for your device and save it to your desktop. Here are the file names for each device, make sure you have the right one:

iPhone 2G – filename: iPhone1,1_3.0_7A341_Restore.ipsw [download link]
iPhone 3G – filename: iPhone1,2_3.0_7A341_Restore.ipsw [download link]
iPhone 3GS – filename: iPhone2,1_3.0_7A341_Restore.ipsw [download link]

2. Open the redsn0w 0.8 application to jailbreak iPhone 3.0.1.

3. Click the Browse button.

4. Locate your device’s IPSW file that you downloaded in step 1 and click Open.

5. The redsn0w window will have the “IPSW successfully identified” message. Click the Next button to continue.

6. redsn0w will ask you to “Please select which options you would like to have“. Make sure the Install Cydia box has a check mark and then click Next.

7. redsn0w will ask you to make sure your device is both OFF and PLUGGED IN to your computer. Make sure you plug in your device in to your computer and then turn it off. Click Next once you have done this.

8. redsn0w will now ask you to connect your device in DFU mode, you must do this properly to jailbreak iPhone 3.0.1.

Hold down the Power button for 3 seconds
Without releasing the Power button, also hold down the Home (bottom center button) for 10 seconds
Without releasing the Home button, release the Power button BUT KEEP holding the Home button for 30 seconds

If you don’t do this properly you will get a DFU Mode Failed message and you’ll have to go back to step one.

9. Once your device has successfully entered DFU Mode, redsn0w will show the following message: “Please wait while your device is being jailbroken. Waiting for reboot.” Your device should reboot after this. If redsn0w is stuck on Waiting to Reboot, unplug your USB cable quickly and plug it back in. The jailbreaking process should continue after tha.

10. Once your device has rebooted redsn0w will start uploading the RAMDisk and kernel.

11. After everything has been successfully uploaded to your device, redsn0w will have; the “Done!” message. Your device will now reboot and you should see the Cydia app on your SpringBoard. Your iPhone is now jailbroken!

Unlock iPhone 3.0.1

See the iPhone 3.0.1 jailbreak and unlock post to unlock your iPhone 3.0.1.

FCC Investigates Apple or AT&T’s Google Voice App Rejection

Arasha — Sat, 01 Aug 2009 05:00:00 +0000

Earlier this week Apple rejected the official Google voice app and removed all other previously approved Google Voice Apps from the App Store leaving many developers frustrated. Many developers invested a lot of time and effort in building their apps, and it was a slap in their faces to have their apps removed.

It has not been confirmed whether Apple or AT&T were responsible for the removal of Google Voice apps. Today the Federal Communications Commission (FCC) decided to contact Apple, AT&T, and Google to find out the whole deal behind this. They want to know why Apple rejected the Google Voice App, which third-party applications were rejected, the contact information for each developer’s app that was rejected, who was responsible for the removal or rejections of the apps, whether AT&T has a role in approval of the apps, a list of iPhone applications or categories of applications that were rejected and for what purposes, and the standards for considering and approving applications.

Tech Crunch has posted the letter that was sent to Apple, AT&T, and Yahoo. It would be interesting to see Apple’s responses to these questions, but unfortunately we won’t ever be seeing them. I do hope this makes Apple or AT&T think twice before rejecting any app next time. A Google spokesperson told Tech Crunch the following:

“Apple did not approve the Google Voice application we submitted six weeks ago to the Apple App Store. We will continue to work to bring our services to iPhone users, for example by taking advantage of advances in mobile browsers. We will supply the information that the Commission has requested.”

I would like to see Google release their Google Voice app to jailbroken iPhones or iPod Touches on Cydia, but that will never happen. We can only dream of this!

[via CNNMoney.com]

Jailbreak and unlock iPhone 3.0.1

Doug — Sat, 01 Aug 2009 00:14:07 +0000

Apple recently released the iPhone 3.0.1 update for iPhone users. This update was released to fix a SMS vulnerability that Charlie Miller and Collin Mulliner discovered in iPhone OS 3.0. If you have a jailbreak or unlock, you will need to follow the below steps to keep it.

How to Jailbreak iPhone 3.0.1

1. After updating to iPhone 3.0.1 download and install iPhone 3.0 firmware.

Download iPhone firmware 3.0 (filename: iPhone1,1_3.0_7A341_Restore.ipsw)

Download iPhone 3G firmware 3.0 (filename: iPhone1,2_3.0_7A341_Restore.ipsw)

Download iPhone 3GS firmware 3.0 (filename: iPhone2,1_3.0_7A341_Restore.ipsw )

2. Download redsn0w.

3. Follow the guide at the Jailbreak iPhone 3.0.1 post. When you select the firmware, choose the 3.0 firmware instead of the 3.0.1 firmware. This is safe and it works!

Update: If your iPhone 3GS is stuck on “Waiting for reboot” unplug your USB cable and plug it back in.

Unlock iPhone 3.0.1

1. Follow the steps above to jailbreak your iPhone.

2. Once your iPhone is jailbroken, open Cydia.

3. Add repo666.ultrasn0w.com to your sources

4. Install ultrasn0w, and reboot!

5. Now your iPhone should be unlocked.