QuickPWN » Jailbreak

Jailbreak and unlock iPhone 3.1.2 using blacksn0w

Hans — Tue, 03 Nov 2009 22:12:05 +0000

Today Geohot released his blacksn0w software unlock for the iPhone 3G and the iPhone 3GS. If you would like to unlock your iPhone on firmware 3.1.2 and use them with other carriers, this tutorial will show you how.

Read the rest of this entry »

blacksn0w

Hans — Sat, 31 Oct 2009 20:25:39 +0000

blacksn0w is a software unlock developed by Geohot for both iPhone 3G and iPhone 3GS users. It works with the latest baseband 05.11.07 and is scheduled to be released on November 4.

Read the rest of this entry »

Jailbreak iPhone 3.12, iPhone 3G, iPhone 3GS, or any iPod touch with blackra1n RC2

Hans — Sun, 25 Oct 2009 21:22:04 +0000

Two weeks ago, Geohot released his blackra1n iPhone 3.1.2 jailbreak. The blackra1n jailbreak software worked with all iPhones and iPod touches running on iPhone 3.1.2 firmware except for the newer 8GB iPod touch (MC models) that Apple released after the September 9 event. The blackra1n jailbreak also did not work on the newer iPhone 3GS which Apple patched the 24kpwn exploit in. blackra1n RC2 works with all iPhone and iPod touches, but the newer iPod touch and iPhone are only tethered jailbreaks. Tethered means that you will need to run blackra1n each time you reboot your iPhone or iPod touch. If you were an iPhone 3G user, you most likely had to try many different methods to get blackra1n to work. Geohot has fixed the iPhone 3G problem so blackra1n should now jailbreak without any problem.

If you already did jailbreak your iPhone or iPod touch, you don’t need to use blackra1n again.

Jailbreak iPhone 3.1.2 with blackra1n RC2

Here is how you can jailbreak iPhone 3.1.2 firmware using blackra1n RC2.

1. Download blackra1n RC2 (Available for both Windows & Mac)

2. Follow the steps at my jailbreak iPhone 3.1.2 post.

blackra1n on Windows 7

I tried blackra1n on Windows 7, but it crashed when I first tried opening it. To get blackra1n to work on Windows 7, do the following:

1. Right-click the blackra1n icon and click properties.

2. Click the Compatibility tab.

3. Under compatibility mode click the box to enable it and select Windows XP (Service Pack 2). Click OK, and then run blackra1n.

I’ve only tried this on a Windows 7 32-bit setup, but it should work on a 64-bit setup as well.

Droid does and iPhone with jailbreak does too

Doug — Tue, 20 Oct 2009 23:19:41 +0000

The Droid is not out yet, but the Droid does website and commercial have been up since Satuday. The commercial makes some fair points about the iPhone not having certain features, but what Verizon does not know is that most of the “i Don’t” remarks are not true for iPhone users who are jailbroken. If you don’t know what a jailbroken iPhone is, go to the jailbreak page to find out. If you want to jailbreak your iPhone, check out our jailbreak iPhone 3.1.2 post.

Here is a list of the features mentiond in Verizon’s iDon’t commercial. Jailbroken iPhone users can already get these features.

iDon’t have a real keyboard: An iPhone does not have a physical keyboard, but it does have a virtual keyboard. Out of all the virtual keyboards I’ve tried, the iPhone’s virtual keyboard is the best. It is really easy to use, and I consider it a real keyboard.
iDon’t run simultaneous apps: Users with jailbroken iPhones can download the Backgrounder app from Cydia and multi-task with it.
iDon’t take night shots: Yes, Verizon is right on this one.
iDon’t allow open development: I’m not really sure what Verizon means by this, but the jailbreak community does allow open developmet.
iDon’t cusomize: Jailbroken iPhones are really customizeable. With Saurik’s Winterboard application, the iPhone can be themed. There are many different quality themes available in Cydia.
iDon’t run widgets: Try the Intelliscreen application from the Rock application. It has widgets that allow you to put whatever you want on your lockscreen. There’s also an application called QTweetr that lets you tweet any time you want by sliding it out.
iDon’t have interchangeable batteries: That’s true, no amount of jailbreaking can give us interchangeable batteries but I don’t really look for this feature in phones.

If Apple were open source, the iPhone could really take on all their competitors. Unless Apple opens up, their competitors like Verizon Droid, Palm Pre, or other phones do stand a good chance at beating them. It doesn’t seem likely that Applew will ever open up. They are always trying to patch the exploits that allow iPhone users to jailbreak. They love playing the cat and mouse game. Will the Verizon Droid cause Apple to open up? I really hope so!

Jailbreak iPhone 3.1.2

Hans — Sat, 17 Oct 2009 02:22:06 +0000

The iPhone 3.1.2 update that Apple released last week required users of jailbroken iPhones or iPod Touches to wait for a new jailbreak software to be released before updating. There was no jailbreak available until Geohot released his new blackra1n 1 click jailbreak software. The blackra1n software is available for both Windows and Mac users, but it only supports iPhone, iPhone 3G, iPhone 3GS, and iPod Touch. blackra1n does not support the iPod Touch 3rd generation 8 GB models that have a MC in the model number. Many iPhone 3G users reported having a problem with blackra1n on iPhone 3G, if you were one of them please leave a comment telling us what problems you encountered and how you solved them. I will be making a blackra1n troubleshooting guide to help users that have any problem with it. You can jailbreak iPhone 3.1.2 with blackra1n, but you cannot unlock iPhone 3.1.2. To unlock iPhone 3.1.2, you must use PwnageTool 3.1.4 which the Dev-Team recently released.

If you want to just jailbreak iPhone 3.1.2 I recommend you use blackra1n, but if you want to unlock then you have no choice but to use PwnageTool which only works with Mac. If you haven’t already downloaded iPhone 3.1.2 or updated, the download links for it are below.

iPhone 3.1.2 download (iPhone1,1_3.1.2_7D11_Restore.ipsw, 241 MB)
iPhone 3G 3.1.2 download (iPhone1,2_3.1.2_7D11_Restore.ipsw, 242 MB)
iPhone 3GS 3.1 download (iPhone2,1_3.1.2_7D11_Restore.ipsw, 306 MB)

Note: Do no’t use Safari to download iPhone 3.1.2 IPSW files, instead use another browser. Safari downloads this as a .ZIP and iTunes is not able to recognize the firmware that way.

Jailbreak iPhone 3.1.2 with blackra1n

1. Download blackra1n

2. Click the make it ra1n button.

3. Your iPhone or iPod Touch will reboot once blackra1n is done doing it’s thing and you should see the blackra1n icon on there. If you don’t see the blackra1n icon, go to the last page on your iDevice and you should see it.

4. Install your preferred aplication from the blackra1n app. You have the option of choosing Cydia, Icy, or Rock. I don’t recommend you to install them all at once, because that may cause problems. Install them one at a time.

Jailbreak iPhone 3.1.2 with PwnageTool

1. Download PwnageTool 3.1.4 (only works with Mac!)

2. You will be creating a custom IPSW and then restoring it through iTunes. If you don’t know how to do that, read my jailbreak iPhone 3.1 with PwnageTool post which gives step by step instructions.

Jailbreak and unlock iPhone 3.1.2

Hans — Thu, 08 Oct 2009 19:26:27 +0000

Update #2: Want to unlock iPhone 3.1.2? Go to my download and install blacksn0w post to unlock.

Update #1: Go to my jailbreak iPhone 3.1.2 with blackra1n post to jailbreak your iPhone or iPod Touch!

Today the iPhone 3.1.2 update was released to iPhone, iPhone 3G, iPhone 3GS, and iPod Touch usres. This update includes mainly bug fixes. If you would like to jailbreak or unlock your device, you must read this. If you have an unlocked iPhone 3G or iPhone 3GS do not update to this new firmware, updating to the iPhone 3.1.2 firmware will permanently update your baseband. The newer baseband does not support software unlocking.

The jailbreak has not been released yet, but you if you’ve got too much time on your hands you may be able to jailbreak if you try the following. If this works please share your results in the comments.

How to Jailbreak iPhone 3.1.2

1. Update to iPhone 3.1.2. After updating, find your iPhone 3.1.2 IPSW file or download it using any of the links below. Remember, don’t use Safari to download. Safari can’t download .IPSW files properly, use a different browser!

iPhone 3.1.2 download (iPhone1,1_3.1.2_7D11_Restore.ipsw, 241 MB)
iPhone 3G 3.1.2 download (iPhone1,2_3.1.2_7D11_Restore.ipsw, 242 MB)
iPhone 3GS 3.1 download (iPhone2,1_3.1.2_7D11_Restore.ipsw, 306 MB)

2. Download redsn0w.

3. Follow the jailbreaking guide at the Jailbreak iPhone 3.1 post.

Unlock iPhone 3.1.2

It’s possible to unlock iPhone 3.1.2 but only if your baseband has not been updated to 05.11.07 or the newer baseband, you must create a custom firmware that uses the 04.26.08 baseband. The iPhone 3.1.2 update updates the baseband to a newer one that permanently blocks the software unlock. A guide on how to unlock iPhone 3.1.2 will be up once a jailbreak tool is released.

For now, follow @QuickPWN and subscribe to QuickPwn YouTube channel for updates.

Today Geohot released blacksn0w. I’ve created a step-by-step tutorial on how to
install blacksn0w on iPhone OS 3:
http://www.iphoneos3.com/2009/11/03/download-and-install-blacksn0w-for-iphone-3g-or-iphone-3gs-3-1-2/

Any linkbacks on your blog are appreciated. We are also creating
guides for users on how to download Cydia’s On File so they can be
safe from future updates.

Jailbreak iPhone 3.1 with Pwnage Tool 3.1, Mac only

Hans — Fri, 18 Sep 2009 20:16:34 +0000

Apple released their iPhone 3.1 firmware on September 9, and now the iPhone Dev Team has released their Pwnage Tool 3.1 software which can jailbreak iPhone 3.1. There is no Windows Pwnage Tool 3.1, it only works for Mac. If you’re a Windows user then you’ll have to wait for the iPhone Dev Team to release redsn0w. If you’re a Mac user, then follow the steps below to jailbreak iPhone OS 3.1.

The Pwnage Tool 3.1 software only works on the following devices: iPod Touch 3.1.1 (first generation only), iPhone 3.1 (first generation), and iPhone 3G 3.1. As of right now the iPhone 3GS, iPod Touch 2nd generation, and the new iPod Touch 3rd generation are not supported.

How to Jailbreak iPhone 3.1 with Pwnage Tool 3.1

1. Download Pwnage Tool 3.1 (Filename: PwnageTool_3.1.dmg Filesize: 23.1 MB).

2. Double-click the Pwnage Tool icon to launch Pwnage Tool. You may get a message that says “PwnageTool is an application downloaded from the Internet. Are you sure you want to open it?“. Just click Open.

3. When Pwnage Tool 3.1 launches you will see a message that says “Copyright 2009 iPhoneDevTeam. This software is not for commercial use. If you bought this software demand a refund. It is not for sale. We are not responsible for any damage this software may do to any of your equipment, BE WARNED.” Just read it and click Ok.

4. Click on the device you want to jailbreak. I have an iPod Touch so I’ll click the iPod Touch in Pwnage Tool. After selecting the device click the arrow in the bottom right corner.

5. Pwnage Tool will now attempt to locate the IPSW file for your device. If you don’t have it downloaded already, here are the download links (iPod Touch download links will not be added here because they expire):

iPhone 3.1 download (iPhone1,1_3.1_7C144_Restore.ipsw, 241 MB)
iPhone 3G 3.1 download (iPhone1,2_3.1_7C144_Restore.ipsw, 242 MB)

6. Once Pwnage Tool finds your IPSW click on it. If it doesn’t find it then you can manually browse and locate it. Click the blue arrow in the bottom right corner of the Pwnage Tool application to continue.

7. Pwnage Tool will now show a message saying something like “We will now create an ipsw file that you can use to restore your iPod Touch (2G) with iTunes. This file will be placed on your desktop. Do you want to continue?“. Click Yes.

8. Pwnage Tool will now start building the IPSW. You will be prompted to enter in your password, just enter in your password and click Ok.

9. Once your IPSW has been buit, Pwnage Tool will display the following message: “Has your iPod Touch (2G) been Pwned before (does it have the pineapple logo)? If you are unsure click No.“. Just go ahead and click No.

10. Time to put your device in DFU mode. Pwnage Tool will guide you through the steps.

11. Once you have successfully put your device in DFU mode Pwnage Tool will display the following: “Successfully entered DFU mode! Close the Pwnage Tool application, start iTunes and restore with your custom firmware bundle.” Just click Ok.

12. Now open iTunes (make sure you have iTunes 9!). If you don’t have iTunes 9 then download it and install it now.

13. Once you launch iTunes 9, press option on your keyboard and click Restore in iTunes. Find the IPSW file that is named something like iPod1,1_3.1.1_7C145_Custom_Restore.ipsw. Make sure it has Custom in the name of the file and then click Choose.

14. iTunes will now restore the custom IPSW file to your iPhone or iPod Touch. Once it’s done you’ll see Cydia and Icy on your device! Congratulations, you are done jailbreaking iPhone 3.1 firmware.

You can jailbreak iPhone 3GS 3.1 and iPod Touch 3rd generation, but the jailbreak is not out for it yet. I’ll create a guide on how to jailbreak it once the software for it is released. Stay tuned!

Downgrade iPhone 3GS 3.1 to iPhone 3GS 3.0

Hans — Wed, 16 Sep 2009 17:08:34 +0000

With the new iPhone 3.1 update, iPhone 3GS users can no longer downgrade from iPhone 3GS 3.1 firmware to iPhone 3GS 3.0. Apple wants users to stay with the most current firmware. There is no way to jailbreak iPhone 3GS 3.1. No custom firmwares are able to be added on iPhone 3GS either. Fortunately, Saurik, the creator of the Cydia application has come up with a solution. It only works for the few that were able to use Cydia’s “on file” system and “hash” their ECID (ECID is the unique chip ID that each iPhone 3GS device has). If you were one of the few, read on below to find out how to downgrade iPhone 3GS 3.1 to iPhone 3GS 3.0. If you were not one of the few, then you are still lucky. iPhone 3.1 can still be jailbroken, but you’ll need to wait until a full jailbreak solution is out. I’ll post the guide here once it’s out.

How to Downgrade iPhone 3GS 3.1 to iPhone 3GS 3.0

If you are on Windows Vista or Windows 7 you will need to run Notepad as Administrator and then locate the hosts file and edit it. Then move on to step 4.

1. Press Windows + R on your keyboard or go to Run.

2. Type in the following: C:\Windows\System32\drivers\etc\hosts.

3. Click OK. You should now get an Open With window. Click on Notepad and then click OK.

4. Your hosts file will now open in Notepad. Make a new line below 127.0.0.1 localhost and copy and paste in the following:

74.208.105.171 gs.apple.com

5. Click File – > Save in Notepad. Where it says “Save as type” make sure you select All Files and then click Save.

6. Download iPhone 3GS 3.0 (iPhone2,1_3.0_7A341_Restore.ipsw) and save it to your desktop. If you haven’t already, download iTunes 9 and install it.

7. You must now put your iPhone 3GS in Recovery mode. Connect your iPhone 3GS to your PC. Hold down the top iPhone 3GS button and the bottom home button for 10 seconds, let go of the top button but continue holding the bottom home button until iTunes displays the following message: “iTunes has detected an iPhone in recovery mode. You must restore this iPhone 3GS before it can be used with iTunes.” Your iPhone 3GS screen should be black.

8. Open iTunes, press shift on your keyboard and click “Restore“. Locate the iPhone 3GS firmware 3.0 file you downloaded in step 6 and iTunes should now begin restoring it.

Troubleshooting

If you get unknown error (3002), it means your Cydia on file system was not hashed. You cannot ever downgrade to firmware 3.0. Just stay on iPhone 3GS 3.1 firmware for now and wait for the iPhone 3.1 jailbreak to be released.

Jailbreak iPhone 3.1

Hans — Wed, 09 Sep 2009 20:38:48 +0000

Update: This tutorial does not install Cydia, in other words you must wait for iPhone Dev Team to release the new redsn0w software. When I saw the successfully jailbroken message on the screen I thought Cydia was installed and in all the excitement I decided to post this up for everyone else. Please wait until the new redsn0w is out. Bookmark this site and I’ll make a tutorial once it’s officially released.

With the iPhone 3.1 update which was recently released, jailbreakers will need to jailbreak their devices again. This update fixes a lot of bugs that were present in the iPhone OS 3.0 firmware, has anti-phising built-in and other cool features. In this post I will explain how to jailbreak iPhone 3.1 using redsn0w.

Note: This tutorial will be using redsn0w version 0.8. There is no redsn0w 3.1 out yet, but this worked for me on 1st Generation iPod Touch 3.1. It may not work for iPhone. If this does not work then don’t complain! I recommend you wait for the Dev Team to release the next version of redsn0w (which may be some time this week). I’ll make another tutorial once they do.

If you unlocked your iPhone and you want to keep your unlock, then don’t update to iPhone 3.1 otherwise you won’t ever be able to software unlock again (iPhone 3.1 updates the baseband permanently).

You must update to iPhone 3.1 first (if you have an unlocked iPhone you must not update yet as this will permanently lock your iPhone). After updating, either locate your iPhone 3.1 IPSW file or download it using any of the links below. Do not use Safari, instead use Firefox or Internet Explorer to download otherwise this will download as a Zip file!

iPhone 3.1 download (iPhone1,1_3.1_7C144_Restore.ipsw, 241 MB)
iPhone 3G 3.1 download (iPhone1,2_3.1_7C144_Restore.ipsw, 242 MB)
iPhone 3GS 3.1 download (iPhone2,1_3.1_7C144_Restore.ipsw, 306 MB)

3. Follow the jailbreaking guide below.

Note:

redsn0w only recognizes iPhone 3.0 firmware (not 3.1 yet!), although you are running firmware 3.1 you must still download iPhone OS 3.0 firmware for your device.

First you must download redsn0w for Windows, Mac, or Linux from here.

redsn0w 0.8 might work for Phone 3.0.1, iPhone 3G 3.0.1, iPhone 3GS 3.0.1, iPod Touch 3.0, and iPod Touch 2G 3.0.

1. Download the iPhone OS 3.0 IPSW file for your device and save it to your desktop. Here are the file names for each device, make sure you have the right one:

iPhone 2G – filename: iPhone1,1_3.0_7A341_Restore.ipsw [download link]
iPhone 3G – filename: iPhone1,2_3.0_7A341_Restore.ipsw [download link]
iPhone 3GS – filename: iPhone2,1_3.0_7A341_Restore.ipsw [download link]

2. Open the redsn0w 0.8 application to jailbreak iPhone 3.0.1.
3. Click the Browse button.

4. Locate your device’s IPSW file that you downloaded in step 1 and click Open.

5. The redsn0w window will have the “IPSW successfully identified” message. Click the Next button to continue.

Page 2– Jailbreak iPhone 3.1 tutorial

Jailbeak and Unlock iPhone 3.1

Hans — Wed, 09 Sep 2009 19:03:36 +0000

Today the iPhone 3.1 update was released to the public. This update fixes a lot of bugs that were present in the iPhone OS 3.0 firmware. If you want to jailbreak or unlock your device, follow the steps below. If you have an unlocked iPhone 3G or iPhone 3GS do not update just yet, updating will permanently lock your device and the ultrasn0w unlocking software won’t work.

The jailbreak has not been released yet, but you can do the following to prepare for it.

How to Jailbreak iPhone 3.1

1. You must update to iPhone 3.1 first. After updating, either locate your iPhone 3.1 IPSW file or download it using any of the links below. Remember, don’t use Safari to download. Safari can’t download .IPSW files properly, use a different browser!

iPhone 3.1 download (iPhone1,1_3.1_7C144_Restore.ipsw, 241 MB)
iPhone 3G 3.1 download (iPhone1,2_3.1_7C144_Restore.ipsw, 242 MB)
iPhone 3GS 3.1 download (iPhone2,1_3.1_7C144_Restore.ipsw, 306 MB)

2. Download redsn0w (not up yet, stay tuned!).

3. Follow the jailbreaking guide at the Jailbreak iPhone 3.1 post (not up yet).

Unlock iPhone 3.1

To software unlock iPhone 3.1, you must create a custom firmware that uses the current baseband. The iPhone 3.1 update updates the baseband to a newer one that permanently blocks the software unlock. A guide on how to unlock iPhone 3.1 this will be up later.